Professional Products

Viruton® Pulver

Powder for cleaning and disinfecting tools, endoscopes, incubators and other surfaces of medical devices

Directions for use: Refer to the dispensing table and measure required amount of tap water. Add the correct amount of powder, using the attached measuring cup, stir the solution. Cover the container and leave it for 15 minutes to activate. Afterwards, stir the solution again. Using warm water will speed up the dissolution of the powder. Small amounts of residue on the bottom of the container ensure the stability of the solution in time. Change the solution daily. Test strips available to confirm the activity of the working solution. Seal the container tightly after use. Do not immerse wet tools in the powder. Do not use on disposable instruments. Follow the instructions of the manufacturer of the tools and equipment. Do not use the product if the packaging is damaged. Store below 25 ° C. Protect against moisture. Cleaning and disinfection of tools and endoscopes: Immerse the instruments in the solution, thoroughly covering all parts and channels of the equipment. After a defined disinfection time (10min. or 30min., depends on chosen concentration), rinse the instruments with drinking water (preferably sterile distilled water or demineralized water). Do not exceed the recommended disinfection time. The product is not intended for tools made of aluminium, copper and brass. Can be used for undamaged chromed and nickel-plated tools. Surface cleaning and disinfection: Spray the surfaces of medical equipment with 0.5% solution or wipe them with a cloth and leave to take action for 30 minutes. Incubators washing and disinfection: detailed instructions available.

Active ingredients: sodium percarbonate, TAED, enzymes, organic acids, non-ionic surfactants, corrosion inhibitors

Packaging units: 1kg with measuring cup, 5kg with measuring cup (use the measuring cup according to the dosing table)

Application: Viruton® Pulver is a modern generation preparation for cleaning and high-level disinfection of invasive and non-invasive medical devices. It is recommended for surgical and dental instruments and all kinds of endoscopes, surgical probes, ventilator tubes and other anesthetic equipment. It can also be used for the disinfection of surfaces of medical equipment, such as incubators. It is recommended for manual disinfection, in ultrasonic cleaners, automatic washers and endoscope cleaning baths. The product does not require an activator. Uncontaminated solution is stable up to 30 hours. The innovative formula contains four enzymes (protease, lipase, amylase and mannase) responsible for removing organic contaminants, such as blood, protein, fats and secretions. The composition of surfactants prevents the powder from dusting and guarantees excellent washing properties.

Effectiveness EN 14885 10 min. 30 min. 60 min.
Bacteria (S. aureus, P. aeruginosa, E. hirae, MRSA) EN 13727 0,5%
Bacteria (S. aureus, P. aeruginosa, E. hirae, MRSA) EN 14561 1% 0,5%
Bacteria (S. aureus, P. aeruginosa, E. hirae, MRSA) EN 13697 0,5%
Fungi (C. albicans) EN 13624 0,5%
Fungi (C. albicans) EN 14562 1% 0,5%
Fungi (C. Brasiliensis) EN 13624 1% 0,5%
Fungi (C. Brasiliensis) EN 14562 2%
Mycobacteria (M. terrae) EN 14348 0,5%* 0,5%
Mycobacteria (M. terrae, M. avium) EN 14563 1% 1%
Viruses (Polio, Adeno, Noro) EN 14476 2% 1%
Viruses (HIV, HBV, HCV, Rota, Herpes, Simplex, Ebola, SARS-CoV-2) EN 14476 2% 1%
Spores (Cl. Difficile) EN 13704 1%*,2% 0,5%
Spores(B. subtilis) EN 13704 1%* 0,5%

* clean conditions

Unia europejska
Call us, we are waiting for your call everyday from 8 a.m. to 6 p.m.
81 535 22 66
Write, we will reply within 1 hour