Mediclean 141 Polymer
Polymer coating for protecting waterproof surfaces, i.e., linoleum, PVC, terrazzo
- Hard, self-polishing polymer coating for protecting and polishing hard floors (including PVC and terrazzo)
- Application: 2–3 L is sufficient to protect 100 m² of floor with 2–3 coats
- Provides anti-slip properties
- Protects the floor from damage
- Adds shine and an attractive appearance
- Recommended for high-traffic areas
Turn off the floor heating. Remove the old coating with Mediclean 121 Striper, then rinse the surface with water and let it dry. Apply 2–3 coats of Mediclean 141 Polimer using a mop. Drying time for one coat is 15–30 minutes. For porous or highly absorbent floors, apply 2 additional coats of the product. To harden the coating and achieve a mirror-like shine, it is recommended to polish the floor with a high-speed machine equipped with a white pad after it has completely dried.
Maintenance: Sweep the floor daily with a dry mop, then wash with Mediclean 110 Floor, Mediclean 112 Shine, or Mediclean 210 Surface. Repair localized damage by diluting Mediclean 141 Polymer in a 1:2 ratio with cold water, spray (mist) the damaged surface, and polish with a high-speed machine (min. 1500 rpm). If a polisher is not available, wash the previously cleaned floor with Mediclean 141 Polimer diluted in a ratio of 1:5 to 1:25 with cold water, or with Mediclean 112 Shine, following the instructions on the label.
A high-performance formula based on acrylic and polyurethane emulsions and waxes, designed to protect most waterproof hard floors. The product forms a durable protective coating on the floor that is resistant to scratches and the penetration of contaminants. Applying several layers of the product helps to even out surface imperfections resulting from porosity and damage caused by use. It has anti-slip properties. The coating does not change color, allowing for spot repairs. It retains a high gloss for a long time. For professional use only.
Composition:
1,2-benzoisothiazol-3(2H)-one (BENZISOTHIAZOLINONE)
Packaging:
5 L canister
pH 8.8±0.5
Acrylics are products used to protect various types of hard floors, such as linoleum, PVC, Tarkett, concrete surfaces, and terrazzo. Acrylic creates a thick, highly durable coating on the floor that is resistant to scratches and the penetration of contaminants. This makes dirt easy to wash off. Mediclean 141 Polymer is a formulation based on urethanes and acrylic polymers. Mediclean 142 Polymer is a formulation based on acrylic and polyurethane emulsions. The formulations differ in chemical composition, which makes Mediclean 141 Polymer slightly more durable and gives it a better gloss even without polishing. Mediclean 142 Polymer requires polishing to achieve a perfect shine; it is slightly less hard but also less expensive.
Contact us.
The cost of applying 100 m² of acrylic for Mediclean 141 Polimer is 82.40 PLN net, while for Mediclean 142 Polimer it is 71.60 PLN net. This is the cost of applying a single coat. It is usually recommended to apply 2–3 layers. This is, of course, only the cost of the acrylic, excluding the cost of labor.
Contact us.
For cleaning delicate surfaces, we recommend Mediclean 110 Floor, Mediclean 111 Automat, Mediclean 112 Shine (maintenance), Mediclean 113 Panel, Mediclean 141 Polimer (maintenance), Mediclean 142 Polimer (maintenance), Mediclean 210 Surface, and Mediclean 570 All.
Contact us.
