Close
Font
A-
A+
Readable font
Turn off font size
Contrast
Turn off contrast
Links

Viruton® Pulver

Powder for cleaning and disinfecting instruments, endoscopes, incubators, and surfaces of medical devices

Active cleaning
Active cleaning
No dusting
No dusting
Medical instruments
Medical instruments
Concentration starting at 1% in 10 min
Concentration starting at 1% in 10 min
We do not sell retail. Product information is available on the website. Additional information is provided on the label and in the product safety data sheet. Use disinfectants safely.
Advantages
Directions for use
Application
Specifications
Downloads
  • Effective at a 1% concentration in 30 minutes.
  • Active cleaning thanks to 4 enzymes
  • Suitable for ultrasonic washers and endoscopes
  • High-level disinfection (spore-killing action)
  • Powder formulation
  • No dust
  • No activator required
  • Demonstrates anti-corrosive properties and high material compatibility – according to tool manufacturer Chirmed
  • Suitable for use on many sensitive materials
  • Protection against corrosion and damage to instruments
  • Guaranteed effectiveness and safety of use
  • Significantly reduces the risk of infection
  • Effectively removes dried organic debris
  • Quick and convenient to use
  • Cost-effective

According to the dosage table, measure the appropriate amount of water at a temperature of 25–30°C, then add the correct amount of powder using the included measuring scoop, stir the solution, cover the container, and let it activate for 15 minutes. After this time, stir the solution again. Using warm water (35°C) will speed up the dissolution of the powder. Small residues at the bottom of the container ensure the solution’s stability over time. Protect from moisture. Close the container tightly after use. Do not immerse wet instruments in the powder. Do not use on disposable instruments. Follow the manufacturer’s instructions for instruments and equipment. Do not use the product if the packaging is damaged. Store at a temperature below 25°C. Use test strips to check the solution’s activity over time.

Cleaning and disinfection of instruments and endoscopes:
thoroughly immerse the instruments, ensuring that all parts and channels of the medical equipment are completely filled with the solution. After the specified action time (10 min. or 30 min., depending on the selected concentration), remove the instruments from the solution and rinse with drinking-quality water (preferably sterile distilled water or demineralized water). Change the solution daily. The product is not intended for copper or brass instruments, nor for mechanically damaged chrome-plated or nickel-plated instruments.

Cleaning and disinfection of surfaces (depending on the selected concentration):
spray medical equipment surfaces with a 1% solution or wipe with a cloth and let it sit for 10 minutes. The product leaves a white residue on the disinfected surface, so it is recommended to wipe off the residue with a disposable towel after disinfection

Cleaning and disinfection of incubators:
detailed instructions for disinfecting incubators are available.

Spectrum Standard according to EN 1488510 min15 min30 min60 min
BacteriaEN 13727 0.5%  
EN 145611% 0.5% 
EN 13697  0.5% 
EN 16615 1%  
Fungi (C. albicans)EN 13624  0.5% 
EN 145621% 0.5% 
EN 16615 1.00%  
Fungi (A. brasiliensis)EN 136241%  0.5%
EN 145622%1.5%1% 
Tuberculosis bacilli (M. terrae)EN 14348 0.5%  
EN 14563   0.5%
Mycobacteria (M. avium, M. terrae)EN 14348 0.5%  
EN 145631%   
Viruses (Polio, Adeno, Noro)EN 144762% 1% 
Adenovirus, NorovirusEN 17111 0.5%  
Enveloped virusesEN 144762% 1% 
EN 171110.5%   
Spores (C. difficile)EN 137041%*, 2% 0.5% 
Spores (C. difficile)EN 171261%   
Spores (Cl. sporogenes)EN 137041%, 2%   
Spores (B. subtilis)EN 137041%* 0.5% 
Spores (B. subtilis, B. cereus)EN 171264%   
Spores (B. subtilis, B. cereus)EN 17126  2.0% 
Spores (C. difficile R027)EN 171261%*, 2%   
Veterinary - Enveloped viruses (Feline coronavirus FCoV)EN 17122 1%  

*clean conditions

Viruton® Pulver is a modern-generation preparation for cleaning and high-level disinfection of invasive and non-invasive medical devices. It is recommended for surgical and dental instruments, as well as all types of endoscopes, surgical probes, ventilator tubes, and other anesthesiology equipment. It can also be used to disinfect the surfaces of medical equipment, such as incubators. It is recommended for manual disinfection, in ultrasonic cleaners, automatic washers, and endoscope washers. The product does not require the addition of an activator. The undiluted solution remains active for up to 30 hours. The innovative formula contains four enzymes (protease, lipase, amylase, and mannose) responsible for removing organic contaminants such as blood, protein, fats, and secretions. The surfactant content prevents powder dusting and ensures excellent cleaning properties.

Composition

Active ingredients per 100 g of product:
44 g sodium percarbonate (CAS: 15630-89-4), 26 g TAED (CAS: 10543-57-4), enzymes, organic acids, nonionic surfactants, corrosion inhibitors

Packaging:
1 kg with measuring scoop, 5 kg with measuring scoop

Product consumption calculator
Product consumption calculator
} EUR
Concentration Table
ConcentrationAmount of concentrate (ml) needed per 1 L of waterWater VolumeAmount of concentrate (ml) needed per 5 L of waterWater VolumeAmount of concentrate (ml) needed per 10 L of waterWater Volume
0,25%2,5 ml997,5 ml12,5 ml4987,5 ml25 ml9975 ml
0,5%5 ml995 ml25 ml4985 ml50 ml9950 ml
1%10 ml990 ml50 ml4950 ml100 ml9900 ml
2%20 ml980 ml100 ml4900 ml200 ml9800 ml
3%30 ml970 ml150 ml4850 ml300 ml9700 ml
4%40 ml960 ml200 ml4800 ml400 ml9600 ml
5%50 ml950 ml250 ml4750 ml500 ml9500 ml
DEDICATED CONTACT
Select a region to view contact information for your dedicated account manager
Region 1
LublinLublin, Subcarpathian, Świętokrzyskie, Lesser Poland
Contact information for regional account manager:
Natalia ŚwiderekSenior B2B Sales Specialist
Region 2
Pomeranian, Warmian-Masurian, Podlaskie, Masovian, Kuyavian-Pomeranian
Contact information for regional account manager:
Mariola WyroślakSenior B2B Sales Specialist
Region 3
Lower Silesian, Opole, Silesian, Lubusz
Contact information for regional account manager:
Agnieszka WaszczyńskaSenior B2B Sales Specialist
Region 4
Łódź, West Pomeranian, Greater Poland
Contact information for regional account manager:
Paulina RozwódB2B Sales Specialist
Select a region to view contact information for your dedicated account manager
FAQ
Does MEDISEPT offer test strips to verify the powder’s activity?

Test strips are available for Viruton Pulver, which can be used to check the solution’s activity. To receive them, a separate order must be placed.

Was this answer helpful to you?
Can’t find the answer to your question?
Contact us.
Send us a message
You will receive a response via email within 1-2 days.
Call us
Our specialists are ready to help you. It may take up to 2 minutes to connect with a consultant. Please have your order number ready.
CALL US
Why didn’t the Viruton Pulver powder dissolve completely?

The entire amount of powder will not dissolve in water within 15 minutes; however, after this time, the solution is fully effective as a biocide. Residues at the bottomthe container ensure long-term stability.

Was this answer helpful to you?
Can’t find the answer to your question?
Contact us.
Send us a message
You will receive a response via email within 1-2 days.
Call us
Our specialists are ready to help you. It may take up to 2 minutes to connect with a consultant. Please have your order number ready.
CALL US
Which products are effective against spores?

Velox Oxy ETA and Viruton Pulver are effective against spores.

Was this answer helpful to you?
Can’t find the answer to your question?
Contact us.
Send us a message
You will receive a response via email within 1-2 days.
Call us
Our specialists are ready to help you. It may take up to 2 minutes to connect with a consultant. Please have your order number ready.
CALL US
Which products can be used for optical components?

We offer Viruton Pulver, a disinfectant powder that can be used on optical components.

Was this answer helpful to you?
Can’t find the answer to your question?
Contact us.
Send us a message
You will receive a response via email within 1-2 days.
Call us
Our specialists are ready to help you. It may take up to 2 minutes to connect with a consultant. Please have your order number ready.
CALL US
CONTACT US
Contact your regional representative directly
* - required field
CONTACT US
Contact your regional representative directly
* - required field
European funds
Confirm
* In accordance with applicable laws, this website and the content presented herein are intended for professionals in the field of medical devices (i.e., in particular, medical professionals or those engaged in the trade of medical devices, as well as their employees/associates) as it contains advertising messages for products intended for use by professional users.
This site contains content intended exclusively for medical device professionals.
To continue using the site, you must confirm your professional status.